Specification Nexus Multichannel amps are designed to work with the Nexus AV hubs only. They drive high quality audio to 8ohm stereo speakers at up to 15W per channel Volume is controlled using the Nexusremote. A key feature of the Nexus amps is that they power down when the Nexuszone is switched off. One amplifier is required per stereo zone.
Wiring 2 core speaker wire to each pair of ceiling speaker (or 4 core to a dual speaker)
Cat 5 or Nexus cable to either right or left speaker
Safety Multichannel amps have a thermal protection mechanism which reduces their power output if they are too hot. Hence the amplifier should be positioned in a ventilated area. Vents must not be blocked.
Amplifiers must not drive speakers with impedance less than 4 ohms.
Power in: 18V DC 60W per pair of amplifiers.
Input: RJ45 AV and control over CAT5 from Nexus
Allows balanced line audio distribution from Nexus Home AV
Output: Drives 8 ohm stereo speakers
15 W per channel
RJ45 Line level audio, video and control
Dimensions and mounting
AVN261–12 310 x 310 x 120mm.
AVN261–6 310 x 310 x 120mm
AVN263 230 x 90 x 120mm
AVN261–12 Nexus HAV Multichannel amplifier - 12 zone
AVN261–6 Nexus HAV Multichannel amplifier - 6 zone
AVN263 Nexus HAV Multichannel amplifier - 4 zone
Kit list Nexus multichannel amplifier
18V power supply + IEC cable one per pair of amps.
Blue 0.5m patch cable one per amp.